Old library gets major update- Raybon+Wyte HP/LP, also Mix Pack 3 updated

Mix pack 3 got a minor update, very similar to the recent updates for MP1+2. Now all 3 libraries are in the same category in Nebula again.

Bigger news- An older library of mine- Raybon + Wyte HP/LP filters, has just got a pretty major update, bringing it up to date with my more recent filter programs. These filters have also been moved to the same category as the MP 1-3 filters, so now if you have all of these libraries, you have a lot of cool HP/LP (and other types) filters all in one spot. It makes using them a lot more enjoyable imo.

But the filter programs in this library got a lot more improvements than just being moved to a new category. Here’s the info:

* Fixed some issues with the Tee-B-one program. First off, it wasn’t using its dynamic samples… at all! I just noticed this after all these years. The program still worked fine, but it just didn’t respond to incoming dynamics of your input at all, to use the different dynamics I sampled for the effect. Fixed. When selecting different filter positions the overall level would change a little bit. Now it’s consistent.

* Removed ‘drive’ control, added ‘trim’ for the pass-through programs, doesn’t really matter either way since the harmonics are so low, but I don’t like the old drive control.

* Reduction in CPU use for most filter programs, without sacrificing sound quality. Also the load times and ram use are reduced.

* Removed all harmonic kerns from all Raybon programs. Upon closer inspection of the actual impulses for the harmonics, the highest dynamic steps I sampled actually had very low level harmonics. There was barely any harmonic content captured in my sampling. What was there is more than 100dB below the level of the fundamental in almost all normal use of the programs. Removing the (barely existant) harmonics brought down CPU use GREATLY. It’s around 1/10th the original use for the LP and around 1/4th for the HP. I have no idea why the unit has such low distortion, but this is what I got out of it. If you look at the old programs in Christian Budde’s vst analyser, it appears that they actually have *higher* than normal harmonics, but even though I really like and regularly use his vst analyser, it can be misleading in some cases, and harmonics with Nebula is one of the cases where it can be misleading (it would take a lot of effort for me to explain why I think this happens). If you just run a test tone at 1khz through the old programs and view it in a spectrum analyzer plug-in you get an entirely different result, and can see that the harmonics are actually very very low, almost non-existant, even with high level input. The actual impulses themselves were even a bit deceptive. They *looked* to have harmonic content across a 40db range in some cases but they’re always very low in level, and really close to the noise floor. This is all why I was fooled into having the LP originally be a 10k program. Long story short- trust me, the harmonics weren’t doing anything but drastically increasing CPU use. At least removing them now reduces it!
It also provides option for the ED soft tabs viagra suffering patients because of its presence in different strengths and flavors. Earlier records of kidney disorder, liver dysfunction heart infections should be informed to http://djpaulkom.tv/dj-pauls-super-bowl-bbq-thighs-with-complex-first-we-feast/ cheap professional viagra doctor as these tendencies are important to consider during research and development. The holistic approach encompasses cleansing negative energy healing and other techniques which ensures you leave the session with an increased spiritual awareness about yourself as well as your partner. cialis order But still it’s better to inform the doctors who prescribed the said medications in order to have a better sex? Here are few of the different kinds of relationship therapy available in Richmond and the various factors that need to be djpaulkom.tv buy viagra in australia taken : It is mandatory to get medical advice before taking the medicine.
* Removed most harmonics for Wyte programs also. Left a couple of kerns of distortion. Did this for the same reason as above with the Raybon, but the distortion wasn’t *quite* as low here as with Raybon programs, so I left a few kerns in. I also shortened the harmonics that are left. This lowered CPU use with these programs too.

* Removed the one harmonic kern for the tb1 program. Again, it was just too low to be worth keeping.

* Moved filter programs from the RB* and RB categories for 44.1khz and 96khz libraries, to the ‘CM4’ and ‘CM9’ categories. These new categories are shared by some of my other releases, including Mixing Filter packs 1-3, and soon, the YouRei HP/LP release. So now if you have all of those releases, you have access to many different HP/LP filters, all in the same place, which is really nice.

* Drastically reduced the number of programs, because they just aren’t needed. There were lite, full, and shq versions for all of the filter programs in the past. Now lite isn’t needed, because the full versions have had their CPU use lowered. So lite versions are gone, which helps reduce clutter. This really matters now since I’ve also moved the programs to a category shared by other filter releases of mine, so if you have those releases, you can quickly pick from many different filters, without too much visual clutter in the list. I also removed the SHQ programs. Trust me, they aren’t needed now. The full versions are now the best quality versions. I also removed the pass-through programs from the category with the filters. Now they’re only found in the ‘PRE’ then ‘CW9’ and ‘CW4’ categories where I put all of my pass-throughs from other releases.

* Fixed irregularities in the T-BeeOne program, when selecting different filter positions the overall level would change a little bit. Now it’s consistent.

* Size of library reduced (saves drive space).

Posted by Tim in Uncategorized