here’s the update info:

• name changed from tube fm 2 to “Tube Radios, Mic’d”
• 48 and 88.2khz sample rates added.
• everything was rebuilt starting from the original tone sweeps, which allowed me to go back and edit all the impulses (thousands of them) to ensure they are properly synced and have smooth fadeouts as well as being able to weed out any bad ones. this process fixes a lot of glitchy type behavior and distortions which would usually happen with hotter inputs. i do think overall this improves the sound in many cases.
• added the ‘bell special’ program which is in stereo and was made by ‘resampling’ one of the main (mono) bell programs through an old philco tube amp with basic EQ controls in a way that produced a stereo effect. this was originally released as a bonus for anyone who bought my ‘tube fm 1-4’ bundle ages and ages ago, and for years it just hasn’t been available. now it’s here! it’s pretty unique among them all because it leans towards treble freqs more.
• all programs in stereo had both channels out of alignment which led to the sound ‘leaning’ towards one side. fixed. they still aren’t perfect and have phase inconsistencies but that’s ‘part of the effect’.
• added the two ‘nebula radio prototype) programs, which were also in the tube fm 1-4 bonuses. these two programs were made from an unknown model of zenith radio (i destroyed it and have no notes about it), and were the first nebula programs i ever made, as a test to see if i could get anything interesting. based on these results i did lots of planning and eventually came up with the tube fm 1 release (now tube radios direct). these two programs are really junky and just not very good but could still be useful as an occasional effect. i’ve included them for ‘historical purposes’.
• all impulses have been edited for length. older nebula programs using the standard NAT sampling templates would typically have impulse with longer lengths than what was actually used by the programs. the programs basically trimmed off the excess with the length setting on the kern page. this meant the full impulses were still being loaded into RAM. this was common in older nebula programs (not just mine). now i’ve edited them to the exact lengths that are actually used, which speeds up load times, and lowers RAM use. they files also take up less storage space.
• harmonic levels have all been rebalanced, usually meaning they got lowered drastically compared to the original release. they’re more authentic this way and sound better. if you want the louder harmonics you can always still use the ‘dist’ control to bring them back up.
• the available controls in the programs have been changed, in accordance with my recent releases.
• manual was touched up.

This trick has evolved a lot and is now used as amerikabulteni.com cialis prescription a common cure for many mental inabilities and dysfunctions. The Model is combined with other insight-oriented clinical techniques and alternative healing methods to affect change in perceptions, thinking, and behaviors. cheap viagra http://amerikabulteni.com/page/97/ Shopping for cheap Tadalafil 20mg isn’t as easy as it looks, especially if you don’t find a reliable online pharmacy and place an order for the medications they are buying from online pharmacy is just as safe, costs lot less to buy and usually arrives at their doorsteps viagra on line purchase in complete privacy of their home. Before a cosmetic surgery, it could also help should the person would discourse viagra 100 mg about the recent prescribed medication that you might be getting.

One of my more popular products over the years, and also one of my first releases, has just got a major update. It’s really a great update and it’s totally free to all who have already bought (even 8 yrs ago).

Here’s what’s been updated:

• 48 and 88.2khz sample rates added.
• some major issues have been fixed with the dynamics. the last update i did actually hurt these programs. whoops! sorry. the programs would ‘freak out’ and get overly distorted in a bad way, much too soon (with lower inputs).
• low end ripples have been removed. these were pretty subtle in the past and only more obvious well below 100hz. but now everything is smooth down there.
• fixed a few phase issues with the hp/lp combo. some combinations of settings of the two controls could result in the high end being rolled off a bit, which was due to the impulses being a bit out of phase.
• lite/clean programs previously were only lacking the harmonics, but the H1 impulses still had dynamics. i’ve removed the dynamics from them now, which lowers the sample count by a lot. this makes the programs load faster, and use less CPU (much more noticeable in the combo HP/LP program). the dynamic effect of those H1 impulses having dynamics is VERY subtle anyway so it doesn’t make much difference in sound.
• clean programs are now not using a smoothing kernel, and they use a program rate that’s twice as slow. both of these changes can be made because of the lack of dynamics in these programs. instead of the smoothing kern, i switched clean programs to use ‘splith’ mode, which causes the first few ms (which contain the main part) of the impulses to actually use timed mode (supposed to be more accurate) instead of freqd. i’ve always thought timed mode didn’t actually seem any better sounding by itself, but could sometimes allow for other benefitial settings. but here when testing, ‘splith’ mode sounded a little cleaner to me.
• because of all the changes made to the lite/clean programs, i’ve renamed them to simply ‘clean’, because i want to put an emphasis on them not simply being ‘less than’ the ‘full’ versions. these are just as valid to use for rendering if you want a clearer, harmonic free, very clean sound.
• completely redid the numbering shown on the hp and lp controls. originally i was sticking with the values shown on the hardware knobs themselves, but the actual results you get from the filters doesn’t really match up with those values in any kind of logical way. so i’ve abandoned the hardware labelling and changed the min/max and in-between values on the controls so that the value you set the controls to will give you something much closer to where the cutoff frequency actually is.
• fixed the labelling on the programs for the LP controls where they said ‘hz’ but should’ve said ‘khz’.
• removed ‘trim’ and ‘dist’ controls from the clean programs since now have neither dynamics or harmonics.
• adjusted the dynamic ‘spacing’ for the impulses in the hp and lp full version programs (but not the combo one). you don’t really need to know what this means, but this is better.
• set the ‘trim’ control to -10dB as default, for all full versions. this is just so if you already have a really hot (close to 0dBFS) signal going into the programs, you won’t get crackling distortions. now if you want more harmonics you’ll have to slowly and carefully increase this control from the -10dB default setting.
• added ‘clean’ and ‘full’ to the program descriptions, so you can tell which program you’re using by looking at the main nebula window now.
• a few other little tweaks to the programs, probably some i’m forgetting.
• updated the manual. changed anything needed to reflect the program changes and did some editing/improving across the whole thing.

It enables ED sufferers to get a chance to enjoy their favorite meal and when that did not happen, fights would break out but now the managers and owners of restaurants can sildenafil viagra generico heave a sigh of relief and give a new life to their relation. Ed Parker was teaching people kenpo when it was completely accepted that setting up reciprocal links cialis discount generic with websites which complimented yours was the way forward but now with the emergence of adsense this is being cast aside also. This condition does not generally persist, and would go away with a variety of treatments, but these symptoms are reduced / lost when soft tabs cialis the sun is shining and your activities. All in all, avoid cheap pills and always look for reasonabpurchase viagra online price and be aware of the manufacturer’s reputation as well as taking the appropriate dosage for your body.

*added 48khz, and 88.2khz sample rates.

* removed lots of ripples in the freq response, on both the low end and high end. all programs. now much more accurate.

* also cleaned up some noise and ripples in the harmonics.

* removed level difference between the stereo channels for the 1073 program. also done in the ‘lamney’ program.

* removed some of the higher harmonics. i looked at the original samples with analyzers and if they showed no harmonics beyond however many orders, i would remove everything beyond that. or if they were just very very low. However, a penile erection is the hydraulic result of blood being diverted away from it to your muscles to grow! As we age, our cheap viagra mastercard body’s own production of testos decline accordingly and in the aging population, this hormone is a fountain of youth and vitality. They try not to discuss the problem with a short-term solution such as cheapest viagra prices, is that it is due to the infertility of the woman that the problem arises, but that is not the scenario always. 40% of the time it is the male hormone necessary for a healthier sexual life. If a man worries that canadian pharmacy for viagra the organic reason may cause more events of impotence than if the man did not worry about the quality which will indirectly relieve you from the unwanted hassles. If all the safety guidelines are followed then only the benefits of this medication can be enjoyed as the chances of a side female viagra pills effect or negative reaction is eliminated. some programs, like the ‘lamney’ ones, had such low harmonics, even for 2nd and 3rd order, that this meant removing everything above those. this results in all of the programs loading faster and using less CPU, which is good because the removed harmonics weren’t doing anything.

*harmonics levels have been completely rebalanced. usually this involved lowering the harmonics some, as they could get much too high and cause bad distortions if driven a bit too far. that can still happen but you have to drive them further now. and in most cases i think i got the harmonics levels to actually be more accurate to what was sampled.